Hydraulic motor is the main heat source in the hydraulic system. Hydraulic motors are actuators that mainly perform rotary motions, a process that converts pressure energy into mechanical energy. Feve...
Oil trapped phenomenon For gear pumps to work smoothly, the coincidence of gear meshing must be greater than 1, so there are always two pairs of gears meshing at the same time, and a part of the oil i...
Gear pump pulsation, noise, and efficiency are the three major indicators for evaluating pump performance. They are interrelated and interact with each other. The fluid noise of the pump is mainly cau...
The inner hole of the shaft sleeve of the gear pump, the outer circle of the shaft sleeve, the uniform wear and scratches of the shaft and the pump casing of the gear pump are between 0.02-0.20mm, whi...
A hydraulic motor is an actuator of a hydraulic system. It converts the fluid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of the output shaft. Liquid i...
1.Combined sealing: The most common sealing method in the pump. It is sealed with a seal ring, which is cheap, but it is easy to leak if the pressure is high. (Seal material: graphite + PTFE) 2. Packi...
