Industry News

  • What are the operating principles of the vane pump?

    04-08-2016

    First, when the work is done, when the column turns cold, then the oil supply will begin to change without any change in production time. If the oil supply time is gone, then the beveled edge of the v...

  • Introduction and Use Precautions Vane Pump

    23-11-2018

    The vane pump is a pump in which the vane in the rotor groove is in contact with the pump casing (stator ring), and the sucked liquid is pressed from the oil inlet side to the drain side.    Classific...

  • The Working Principle of Vane Pump

    24-11-2018

    When the vane pump rotor rotates, the vane is pressed against the inner surface of the stator by the centrifugal force and the pressure oil. The working volume formed by the two blades and the inner s...

  • Vane Pump Application Installation Common Sense

    29-11-2018

    The vane pump is a hydraulic machine that converts the mechanical energy of the power machine into water energy (heat energy, pressure energy, kinetic energy) by the rotation of the impeller. This is ...

  • Common Problems with Vane Pumps

    01-12-2018

    1. The vane pump is noisy There are two reasons for the high noise, the oil in the fuel tank is not enough or the pump core is worn. When this problem occurs, you should first check if the fuel volume...

  • How to Prevent Oil from the Vane Pump Hydraulic Tank

    06-12-2018

    The vane pump is a pump in which the vane in the rotor groove is in contact with the pump casing (stator ring), and the sucked liquid is pressed from the oil inlet side to the drain side.    After the...